With its base in the water, attach Freddy to the side of the tub using its suction cups.
Pull the lever handle to turn Freddy on and get the action started.
Connect the flexible hose to Freddy’s helmet and start putting out those bath fires.
Aim, spray, and save the day with the spray nozzle accessory.
Spin the fire wheel and water gauge and enjoy their sprinkle by connecting accessories to the hose or right on top of Freddy’s helmet.
Watch Freddy’s googly eyes swirl at changing speed as the water spins, sprinkles, and sprays.
When the hard day’s work is done, pull up the lever handle to turn Freddy off, then store all accessories of the spray bath toy on Freddy’s body, ready for another exciting bath tomorrow.
Mauris mauris ante, blandit et, ultrices a, suscipit eget, quam. Integer ut neque. Vivamus nisi metus, molestie vel, gravida in, condimentum sit amet, nunc. Nam a nibh. Donec suscipit eros. Nam mi. Proin viverra leo ut odio. Curabitur malesuada. Vestibulum a velit eu ante scelerisque vulputate.
Sed non urna. Donec et ante. Phasellus eu ligula. Vestibulum sit amet purus. Vivamus hendrerit, dolor at aliquet laoreet, mauris turpis porttitor velit, faucibus interdum tellus libero ac justo. Vivamus non quam. In suscipit faucibus urna.
Nam enim risus, molestie et, porta ac, aliquam ac, risus. Quisque lobortis. Phasellus pellentesque purus in massa. Aenean in pede. Phasellus ac libero ac tellus pellentesque semper. Sed ac felis. Sed commodo, magna quis lacinia ornare, quam ante aliquam nisi, eu iaculis leo purus venenatis dui.
- List item one
- List item two
- List item three
Cras dictum. Pellentesque habitant morbi tristique senectus et netus et malesuada fames ac turpis egestas. Vestibulum ante ipsum primis in faucibus orci luctus et ultrices posuere cubilia Curae; Aenean lacinia mauris vel est.
Suspendisse eu nisl. Nullam ut libero. Integer dignissim consequat lectus. Class aptent taciti sociosqu ad litora torquent per conubia nostra, per inceptos himenaeos.
Good to Know
Ready Freddy can be used with water from the tub, so water temperature remains constant.
No more running water! Ready Freddy’s unique circulating water pump (CWP) runs an endless stream of water without wasting water from the tap.
Like all Yookidoo motorized bath toys, Ready Freddy upholds the most stringent water safety standards and are the only IPX7 waterproof certified bath toys.
"I have a two year old toddler that I had fights with every time I wanted him to take a bath, so I was looking for an item that will make it fun for him to enjoy while taking a bath." |AL , NEW ROCHELLE, NY
Is it safe to use this battery-operated product under water?
Yes. Ready Freddy upholds the most stringent safety standards (ASTM, EN71, ect’) and is IPX7 waterproof certified, ensuring the utmost safety in using battery-operated products when immersed in water. Still, please follow these guidelines to ensure optimal safe use of the product:
1. Use 4 X AA batteries only.
2. WARNNING: don’t use rechargeable batteries.
3. Use quality batteries of a known brand.
4. Make sure the battery compartment is tightly sealed after every time you change the batteries.
Is this product BPA free?
Yes, this product is BPA free.
What age is this product for?
This product is recommended for children ages 3-6 years. No matter what their age, you should never leave a child unattended in the bathroom or bathtub.
How do I operate Freddy for the first time?
Before you can start enjoying your new Ready Freddy, batteries must be inserted. We strongly recommend using new, good quality batteries to ensure optimal operation over time.
What types of batteries are needed to operate the product?
4 X AA (LR6) batteries (not included) of good quality and a known brand are needed. WARNNING: don’t use rechargeable batteries.
How do I insert the batteries?
With caution! Before inserting the batteries, ensure the product is thoroughly dry! To insert batteries, unscrew the battery compartment cover (located on Freddy’s back side) using a Phillips head screwdriver. Insert 4 X 1.5V AA (LR6) batteries, ensuring correct polarity. Close the compartment cover and firmly screw it back into position (see instructions PDF here). Attention! Before putting Freddy in the water, make sure the battery compartment is tightly sealed.
What is the required water level for operating Ready Freddy?
Use the suction cups to stick Freddy to the side of the tub and fill the tub with water. Please note, Freddy should be submerged in at least 2 inches (5 cm) of water before activating the lever handle. This means the water should reach the bottom of Freddy’s belt at least.
How do I start Freddy’s water flow?
After attaching Freddy to the side of the tub and filling it with enough water, pull the lever handle to start the water flow. Make sure the water reaches the bottom of Freddy’s belt.
What do I do if Ready Freddy stops working?
The product may stop working when the propeller or filter are blocked by dirt, hair, or soap. In order to fix this, unscrew the filter and pull it out. Wash with soap and water, ensuring that the filter mesh is completely clean. Make sure the propeller rotates freely. If it does not, try to release the clog with a screwdriver, until it rotates freely again. Reinsert filter and screw into place.
If the water is still not running, change the batteries and make sure to tightly close the battery compartment lid (see instructions above).
Freddy’s water flow is too soft. What may be the cause?
Try to blow into the output hole on the helmet, to make sure nothing is blocking the connection. Then pull the lever, turning the pump on, and wait for it to fill with water. Use your finger to plug the water output hole for a minute. Other reasons for the slow water flow could be related to the filter or the batteries. In this case, clean the filter mesh and make sure that the pump propeller spins freely or change the batteries.
What if the product still does not work?
Please contact us.
I replaced the batteries and found that there was water in the battery compartment. What should I do?
The battery compartment may not have been closed properly. It is very important to make sure the lid is sealed, and the screws are tightened using a Phillips screwdriver. Before re-operating, wipe the battery compartment dry and remove all rust marks using a paper towel. Only when completely dry, insert the batteries, close the lid well, and try to operate the product. If Freddy still doesn’t work, please contact our customer service.
How do I clean the filter?
Unscrew the filter (located at the bottom of the product) and pull it out. Wash with soap and water, ensuring that the filter mesh is completely clean. Reposition the filter and screw firmly.
How often should I clean the filter?
The filter should be cleaned every time batteries are replaced.
What should I do if I notice mold developing?
It is recommended to properly rinse, drain, and dry out the product after every use. Use the cup dispenser to ensure dry and mold-free storage of the tumblers. Unless you do that, Yookidoo® bath toys will need a good cleaning every two weeks or so in order to remain mold-free. When a thorough cleaning is required, fill up a bucket with water and add in some vinegar. Let the spout soak in the vinegar water for around 30 minutes, then turn it on to circulate the water through the pump. Rinse the spout off and dry using a paper or cloth towel.
What is the date code and where can I find it on the product?
The Yookidoo date code number helps us track the production date of the product. Ready Freddy’s date code is on the battery cover (located at the back of the product). It is a 5-digit number that ends with letters.